Reliability testing, built for the extremes
Chambers engineered, manufactured and commissioned in Guangzhou
Temperature and humidity, thermal shock, HAST, walk-in rooms and fully custom environmental enclosures — for EV batteries, semiconductors, consumer electronics, aerospace and low-altitude flight.
Nine families of environmental test equipment
From a 100 L benchtop chamber to a 75 m³ walk-in room, every system is designed, built and commissioned by our own team in Nansha, Guangzhou.
Temperature & Humidity Chambers
100 L to 1000 L · −100 °C to +200 °C · 20–98 %RH
View range →
Thermal Shock Chambers
Two-zone and three-zone · transfer ≤10 s · GJB and MIL-STD programmes
View range →
Walk-in Environmental Rooms
4 m³ to 75 m³ · modular panel construction · combined stress
View range →
HAST / PCT Accelerated Stress
Unsaturated and saturated steam · package-level leakage screening · IEC 60068 and JESD22
View range →
Rapid Temperature Change
Ramp rates 5–25 °C/min · wafer-level screening
View range →
Temperature–Humidity–Vibration
Three-stress coupling · several profiles in one setup
View range →
Rain & IP Water Ingress
IPX1 to IPX9K · IEC 60529
View range →
Custom Environmental Enclosures
Production floors · BESS containers · complete aircraft · extreme reproduction
View range →
Monitoring & Test Software
Chamber monitoring system and automated test platform, bundled with equipment
View range →Frequently specified platforms
These are the configurations buyers ask for most often. Every model can be modified — volume, temperature range, port configuration, fixture and interface.
HR-TH-100
Interior 400 × 500 × 500 mm · temperature zones A to V, made to order
HR-HT
Ambient +10 °C to +350 °C · precision control for material heat resistance
HR-TS-FF
−65 °C to +150 °C · air-actuated transfer in 15–20 s
H-WTH-4000
2 × 2 × 1 m · −70 °C to +150 °C · customisable
HAST-110
110 °C / 0.4 MPa · precise exposure of package-level leakage
HR-TSF
Transfer ≤5 s · a common choice for wafer-level screening
A manufacturer, not a trading company
We design the chamber, build the cabinet, write the control software and commission the system ourselves. That is why a non-standard request is a conversation about engineering rather than an enquiry we have to forward to someone else.
- In-house mechanical, refrigeration and control design — non-standard volumes, temperature ranges and interfaces are routine work
- Core components from tier-one international suppliers, with in-process quality control on every unit
- Monitoring and test software included with the chamber, on a perpetual licence
- Commissioning, operator training and calibration documentation supplied with the system
- Spare parts and remote diagnostic support after handover
Built in Guangzhou since 2022
Test programmes by sector
Each sector has its own failure modes and its own standards. These are the configurations and test sequences we use most often.
New Energy Vehicles
Test objects, standards and recommended chamber configuration.
Read more →Semiconductors
Test objects, standards and recommended chamber configuration.
Read more →Consumer Electronics
Test objects, standards and recommended chamber configuration.
Read more →Aerospace & Defence
Test objects, standards and recommended chamber configuration.
Read more →Low-Altitude Economy (UAV / eVTOL)
Test objects, standards and recommended chamber configuration.
Read more →Intelligent Software · Monitoring and Automated Test
Test objects, standards and recommended chamber configuration.
Read more →Recent projects
Customer names are withheld where confidentiality applies; the engineering parameters and measured results are as delivered.
High-temperature ageing validation for EV battery modules
28 days of continuous high-temperature ageing at ±1.5 °C uniformity, 120 modules per batch, replacing outsourced ageing and feeding results straight into the test platform.
Read the case →
Thermal shock and damp-heat cycling for automotive-grade connectors
A three-zone thermal shock chamber paired with a temperature-humidity chamber, covering −40 to +150 °C shock and 85 °C / 85 %RH, supporting ISO 16750 and customer-specific standards.
Read the case →
Building HAST capability at an OSAT
HAST and PCT systems with bias fixtures, taking package-level moisture-reliability testing in-house ahead of a new QFN line.
Read the case →Send us your test standard
Tell us the standard, the specimen size and the temperature profile. We will reply with a proposed configuration, a delivery estimate and the documents you need for internal approval.